1)What is Security testing?
It is a process used to look out whether the security features of a system are implemented as designed and also whether they are adequate for a proposed application environment. This process involves functional testing, penetration testing and verification.
2)What is Installation testing?
Installation testing is done to verify whether the hardware and software are installed and configured properly. This will ensure that all the system components were used during the testing process. This Installation testing will look out the testing for a high volume data, error messages as well as security testing.
3)What is AUT ?
AUT is nothing but "Application Under Test". After the designing and coding phase in Software development life cycle, the application comes for testing then at that time the application is stated as Application Under Test.
4)What is Defect Leakage ?
Defect leakage occurs at the Customer or the End user side after the application delivery. After the release of the application to the client, if the end user gets any type of defects by using that application then it is called as Defect leakage. This Defect Leakage is also called as Bug Leak.
5)What are the contents in an effective Bug report?
Project, Subject, Description, Summary, Detected By (Name of the Tester), Assigned To (Name of the Developer who is supposed to the Bug), Test Lead ( Name ), Detected in Version, Closed in Version, Date Detected, Expected Date of Closure, Actual Date of Closure, Priority (Medium, Low, High, Urgent), Severity (Ranges from 1 to 5), Status, Bug ID, Attachment, Test Case Failed (Test case that is failed for the Bug)
6)What is Bug Life Cycle?
Bug Life Cycle is nothing but the various phases a Bug undergoes after it is raised or reported.
- New or Opened
- Assigned
- Fixed
- Tested
- Closed
7)What is Error guessing and Error seeding ?
Error Guessing is a test case design technique where the tester has to guess what faults might occur and to design the tests to represent them.
Error Seeding is the process of adding known faults intentionally in a program for the reason of monitoring the rate of detection & removal and also to estimate the number of faults remaining in the program.
8)What is the difference between Bug, Error and Defect?
Error : It is the Deviation from actual and the expected value.
Bug : It is found in the development environment before the product is shipped to the respective customer.
Defect : It is found in the product itself after it is shipped to the respective customer.
9)What is Test bed and Test data ?
Test Bed is an execution environment configured for software testing. It consists of specific hardware, network topology, Operating System, configuration of the product to be under test, system software and other applications. The Test Plan for a project should be developed from the test beds to be used.
Test Data is that run through a computer program to test the software. Test data can be used to test the compliance with effective controls in the software.
10)What is Negative testing?
Negative testing - Testing the system using negative data is called negative testing, e.g. testing the password where it should be minimum of 8 characters so testing it using 6 characters is negative testing.
11)What are SDLC and STLC ? Explain its different phases.
SDLC
- Requirement phase
- Designing phase (HLD, DLD (Program spec))
- Coding
- Testing
- Release
- Maintenance
STLC
- System Study
- Test planning
- Writing Test case or scripts
- Review the test case
- Executing test case
- Bug tracking
- Report the defect
12)What is Ad-hoc testing?
Ad hoc testing is concern with the Application Testing without following any rules or test cases.
For Ad hoc testing one should have strong knowledge about the Application.
13)Describe bottom-up and top-down approaches in Regression Testing.
Bottom-up approach : In this approach testing is conducted from sub module to main module, if the main module is not developed a temporary program called DRIVERS is used to simulate the main module.
Top-down approach : In this approach testing is conducted from main module to sub module. if the sub module is not developed a temporary program called STUB is used for simulate the submodule.
14)What is the difference between structural and functional testing?
Structural testing is a "white box" testing and it is based on the algorithm or code.
Functional testing is a "black box" (behavioral) testing where the tester verifies the functional specification.
15)What is Re- test ? What is Regression Testing ?
Re- test - Retesting means we testing only the certain part of an application again and not considering how it will effect in the other part or in the whole application.
Regression Testing - Testing the application after a change in a module or part of the application for testing that is the code change will affect rest of the application.
16)What is UAT testing? When it is to be done?
UAT testing - UAT stands for 'User acceptance Testing. This testing is carried out with the user perspective and it is usually done before the release.
17)What are the basic solutions for the software development problems?
- Basic requirements - clear, detailed, complete, achievable, testable requirements has to be developed. Use some prototypes to help pin down requirements. In nimble environments, continuous and close coordination with customers/end-users is needed.
- Schedules should be realistic - enough time to plan, design, test, bug fix, re-test, change, and document in the given schedule.
- Adequate testing – testing should be started early, it should be re-tested after the bug fixed or changed, enough time should be spend for testing and bug-fixing.
- Proper study on initial requirements – be ready to look after more changes after the development has begun and be ready to explain the changes done to others. Work closely with the customers and end-users to manage expectations. This avoids excessive changes in the later stages.
18)What are the common problems in the software development process?
- Inadequate requirements from the Client - if the requirements given by the client is not clear, unfinished and not testable, then problems may come.
- Unrealistic schedules – Sometimes too much of work is being given to the developer and ask him to complete in a Short duration, then the problems are unavoidable.
- Insufficient testing – The problems can arise when the developed software is not tested properly.
- Given another work under the existing process – request from the higher management to work on another project or task will bring some problems when the project is being tested as a team.
- Miscommunication – in some cases, the developer was not informed about the Clients requirement and expectations, so there can be deviations.
19)Why does software have bugs?
- Miscommunication or no communication – about the details of what an application should or shouldn't do
- Programming errors – in some cases the programmers can make mistakes.
- Changing requirements – there are chances of the end-user not understanding the effects of changes, or may understand and request them anyway to redesign, rescheduling of engineers, effects of other projects, work already completed may have to be redone or thrown out.
- Time force - preparation of software projects is difficult at best, often requiring a lot of guesswork. When deadlines are given and the crisis comes, mistakes will be made.
20)What software testing types can be considered?
Black box testing – This type of testing doesn’t require any knowledge of the internal design or coding. These Tests are based on the requirements and functionality.
White box testing – This kind of testing is based on the knowledge of internal logic of a particular application code. The Testing is done based on the coverage of code statements, paths, conditions.
Unit testing – the 'micro' scale of testing; this is mostly used to test the particular functions or code modules. This is typically done by the programmer and not by testers; it requires detailed knowledge of the internal program design and code. It cannot be done easily unless the application has a well-designed architecture with tight code; this type may require developing test driver modules or test harnesses.
Sanity testing or Smoke testing – This type of testing is done initially to determine if a new software version is performing well enough to accept it for a major testing effort. For example, if the new software is crashing the systems in every 5 minutes or corrupting databases, the software may not be in a 'sound’ condition to proceed for further testing in its current state.
Functional testing – This a commonly used black-box testing geared to check the functional requirements of an application; this type of testing should be done by testers.
Integration testing – This testing is combining the ‘parts’ of an application to determine if they function together correctly. The 'parts' can be code modules, individual applications, client and server applications on a network, etc. This type of testing is especially relevant to the client/server and distributed systems.
Incremental Integration testing – This is continuous testing of an application when a new functionality is added the existing ones; it checks the application functionality by verifying whether it works separately before all parts of the program are completed, in this type it will be checked whether to introduce test drivers or not; this is done by programmers or by testers.
Regression testing – This is testing the whole application again after the fixes or the modifications are done on the software. This is mostly done at the end of the Software development life cycle. Mostly Automated testing tools are used for these type of testing.
System testing – This is a type of black-box type testing that is based on overall requirements specifications; covers all combined parts of a system.
End-to-end testing – This is similar to system testing; this involves testing of a complete application environment such as interacting with a database, using network communications, or interacting with other hardware, applications and so on.
UAT ( User Acceptance Testing ) – This type of testing comes on the final stage and mostly done on the specifications of the end-user or client.
Usability testing – This testing is done to check the 'user-friendliness' of the application. This depends on the targeted end-user or customer. User interviews, surveys, video recording of user sessions, and other techniques can be used. Programmers and testers are usually not appropriate as usability testers.
Compatibility testing – Testing how well the software performs in a particular hardware, software, operating system, network etc.
Comparison testing – This is nothing comparing the software strengths and weakness with another competing product.
Mutation testing – This is another method for determining if a set of test data or test cases is useful, by purposely introducing various code changes or bugs and retesting with the original test data or cases to determine whether the 'bugs' are detected.
21)How do you decide when you have 'tested enough’?
Common factors in deciding when to stop are:
- Deadlines (release deadlines, testing deadlines, etc.)
- Test cases completed with certain percentage passed
- Test budget depleted
- Coverage of code/functionality/requirements reaches a specified point
- Bug rate falls below a certain level
- Beta or alpha testing period ends
22)Describe the Software Development Life Cycle
It includes aspects such as initial concept, requirements analysis, functional design, internal design, documentation planning, test planning, coding, document preparation, integration, testing, maintenance, updates, retesting, phase-out, and other aspects.
23)Describe the difference between validation and verification
Verification is done by frequent evaluation and meetings to appraise the documents, policy, code, requirements, and specifications. This is done with the checklists, walkthroughs, and inspection meetings.
Validation is done during actual testing and it takes place after all the verifications are being done.
24)What is the difference between QA and testing?
Testing involves operation of a system or application under controlled conditions and evaluating the results. It is oriented to 'detection'.
Software QA involves the entire software development PROCESS - monitoring and improving the proces, making sure that any agreed-upon standards and procedures are followed, and ensuring that problems are found and dealt with. It is oriented to 'prevention'.
25)What is quality assurance?
Software QA involves the entire software development PROCESS - monitoring and improving the process, making sure that any agreed-upon standards and procedures are followed, and ensuring that problems are found and dealt with. It is oriented to 'prevention'.
26)What is the purpose of the testing?
Software testing is the process used to help identify the Correctness, Completeness, Security and Quality of the developed Computer Software.
Software Testing is the process of executing a program or system with the intent of finding errors.
0 comments:
Post a Comment